UNI EN 13964

Conformity UNI EN 13964

INFORMATION FOR THE CLIENT

imgConf

Description Art.
Profil de la délimitation ou le volet 5001
Profil de la délimitation ou de l’aluminium obturation 5001A
Profil de la délimitation ou obturateur dans galvanisé 5006
Profil de la délimitation ou obturateur dans galvanisé 5020
Profil de la délimitation ou obturateur dans galvanisé 5025
Profil de la délimitation ou de l’arc de l’obturateur 5001AR
Profil de la délimitation ou de l’arc de l’obturateur 5001ARZ
Profil cadre déclencheur « Z » 600
Profil cadre obturateur 6 mm 606
Cadre ou obturateur Profil à « Z » en aluminium 600A
Cadre de profilés ou déclencheur pour « Z » 600N
Profil cadre obturation 10 mm 610
Coin baguette de gypse et le rasage de gypse 250
Coin baguette de gypse et le rasage de gypse 300
Cornières pour le rasage aluminium 300A
Galvanisé la couche mince cloison sèche / plâtre Paraspigolo de 320
Plaques de plâtre / plâtre la couche mince de Paraspigolo ALUMINIUM 330
Paraspigolo INOX microstirato placoplâtre / couche mince de plâtre 340
Coin baguette de gypse et le rasage de gypse angle variable 300AV
Coin baguette de gypse et le rasage de gypse A 135 ° 135/30
Paraspigolo arc 450
Paraspigolo arc 450/30
Protection placoplâtre coin angles de 105 ° à 140 ° E 5002
Coin Perimeter pour plafonds en plâtre 430
Coin Perimeter pour plafonds en plâtre 430/40
Coin Perimeter pour plafonds en plâtre 430/50
Coin Perimeter pour plafonds en plâtre 430/54
Angulaires plafonds périmètre de plâtre 427

Le but de l’information

Ce document est destiné à informer le client sur les caractéristiques techniques et les modes d’utilisation des profils, des baguettes d’angle et angulaire commercialisés par AFFINT Srl

1. INFORMATION DE PRODUCTION

Pour la sélection des profils, des baguettes d’angle et angulaire, il est essentiel de considérer la gamme de hauteur souhaitée, emplacement naturel du bâtiment et les éléments supplémentaires nécessaires demande pour assurer le succès des travaux.
Le profil de plâtre produit par AFFINT Ltd est conçu pour être mis en place dans les murs porteurs ou préfabriquée verticale et inclinée ou horizontale, comme un point de départ pour les feuilles de matériau isolant. Disponible en différentes épaisseurs, la polyvalence de ce produit nous permet des applications sur tout type de surface au moyen de vis ou de chevilles. Les profils pour plaques de plâtre sont en acier galvanisé, acier inoxydable et aluminium. Conformément aux dispositions de l’article 4.2 de la norme UNI EN 13964: 2005 « Plafonds Exigences et méthodes d’essai » (voir le résumé indice UNI EN 13964: 2005), la taille de la conception du faux plafond, les composants de sous-structure et membranaires sont basées sur la coordination modulaire selon ISO référence 1006.

Les produits de protection du bord de AFFINT Ltd ont pour objet la protection des arêtes vives de la plaque de plâtre. Disponible en différentes largeurs et angles permet des applications sur tous les types de plaques de plâtre. La remarquable capacité à absorber les chocs permet d’assurer une protection efficace de tous les types et de vous permettre de rejoindre la réunion dans les coins des plaques de plâtre.
Les produits angulaires de AFFINT Ltd ont pour but de soutenir le périmètre de la fibre minérale. Disponible en différentes largeurs, la polyvalence de ce produit nous permet des applications sur tout type de surface par l’intermédiaire d’ancrage avec des vis ou des bouchons.
La performance finale des comptoirs en kit ou des composants dans les systèmes assemblés déclarées par le constructeur sont atteint que se ils sont installés conformément aux instructions du fabricant pour l’installation.

2. Évaluation de la conformité ‘
CE le marquage cE pour ces produits ne est pas directement applicable puisque ce sont les accessoires destinés à être incorporés dans des kits complets pour la construction de plafonds, pour lequel le marquage CE est prévue seulement pour l’ensemble

système « false » selon la norme UNI EN 13964: 2005.
En ce qui concerne les exigences qui y sont contenues, applicables aux différents composants du kit, les produits AFFINT,

répondre aux exigences du paragraphe 4.2 de la norme UNI EN 13964: 2005 « Plafonds Exigences et méthodes d’essai » (voir répertoire par lot N UNI 13964: 2005), comme ayant des caractéristiques techniques et des performances similaires aux accessoires déjà kit intégré pour faux marquée il y a.
Par conséquent, les produits AFFINT, lorsqu’il est utilisé dans le kit pour faux marquage CE selon la norme UNI

EN 13964: 2005 must be installed in compliance with the specifications of the manufacturer of the kit.

3. LEGISLATIVE BASES AND GENERAL CONDITIONS

This document is prepared in accordance with

    • Directive 89/106 / EEC harmonization of the laws and regulations of the Member States relating to construction products
    • DPR 248/93 Transposition of Directive 89/106 / EEC as amended by Presidential Decree 499/97
    • UNI EN 13964: 2005 Ceilings Requirements and test methods

4. METHOD OF USE

      • Qualified Personnel
        attention THE INFORMATION PROVIDED IN THIS DOCUMENT MUST BE UNDERSTOOD AS OF ADVICE FOR THE PROPER USE OF THE PRODUCT IN ACCORDANCE WITH THE REGULATIONS ON THE OPERATOR SAFETY.
      • use intended by the manufacturer
        profiles, edge protection and angle produced by AFFINT are available in different thicknesses and the versatility of these products allows us to applications on any type of surface with screws or tasseli.
      • Storage and transportation
        This product must be preserved from moisture, heat and other agents that could damage the geometry or structure in the early stages of storage and transport.
      • Application and installation
        Environmental conditions: Ambient temperature: 5 ° C min + max + 40 ° C
        Ambient relative humidity: 80% max
        Attachments: Equipment manual varies
        Installation: Installation must be done by carefully following the manufacturer’s instructions.
        The installation of countertops must be performed in accordance with Appendix A « Installation Guide » of the UNI EN 13964: 2005.

ETAG 004

Conformità ETAG 004

INFORMATION FOR THE CLIENT

imgConf2

Description Article
STARTING PROFILE ALUMINIUM FOR COATING SYSTEMS WITH DRIP certificazioniImg_01 401
UNDER WINDOWS ALUMINIUM PROFILE certificazioniImg_02 401s
CLOSING PROFILE ALUMINIUM certificazioniImg_03 401c
CORNER BEAD IN ALUMINIUM 25X25 certificazioniImg_04 400
CORNER BEAD ALUMINIUM FOR THERMAL COATING WITH 8X12 GLASS FIBER certificazioniImg_05 400r50
CORNER BEAD FOR THERMAL COATING IN WHITE PVC WITH 8X12 GLASS FIBER certificazioniImg_06 400pr50
CORNER BEAD PVC WITH GLASS FIBER FOR VARIABLE ANGLES certificazioniImg_07 400bav
CORNER BEAD WITH MESH IN GLASS FIBER WITH DRIP certificazioniImg_08 400prg
“V” PREFORMED WITH MESH certificazioniImg_09 400rv
“U” PREFORMED WITH MESH certificazioniImg_10 400ru
PVC STOP PROFILE + FIBER GLASS certificazioniImg_11 403 406 410

  • Profiles for thermal insulation system: evaluation of conformity age 004
    Information for the customer
    PURPOSE OFThis document is intended to inform the customer about the technical characteristics and the mode of use of profiles marketed by AFFINT Srl
    1 PRODUCTION INFORMATION

For the selection of profiles, it is essential to consider the application range of the desired (target for plaster, drywall, etc), height, nature-position of the building and the wind speed to ensure the success of the work. Of openings, plinths, edges, and various building elements should be used appropriate profiles, aluminum, pvc, with and without pre-glued to the regular network installation and protection of the panels of insulating material. The products AFFINT S.r.l. are aluminum profiles of different dimensions which, due to their characteristics explained below, ensure total protection of insulation systems in Coat.
2 COAT SYSTEMS: FEATURES PROFILES

The shape of the profiles AFFINT LTD is designed to ensure a smooth leveling, a fundamental requirement for the installation of insulating material used, the basic element for mounting to a rule of art. It allows rapid processing and economic, has good corrosion resistance especially for alkali, it is resistant to the flow and you can make accurate cuts corners and chipless. In the insulation systems to « coat » the angular profiles are employed as starting structure, such as profiles of plastering or as shaving of the corners and constitute a rapid and optimum coverage of the corner areas and edges.

The prototype is an angular profile with elle drip with dimensions in mm lung. W = 2500. = 53 sp. 5 (see catalog), and is achieved by profiling from aluminum alloy 3105 for plastics processing.
3 ASSESSMENT OF CONFORMITY ‘

The CE marking for this product is not directly applicable since it is an accessory component intended to be inserted in a Coat Systems, which is scheduled for the CE marking in accordance with the requirements defined in ETAG 004 The ETAG 004 provides for the release of the CE marking comply with all the requirements which must meet all of the components of the system.

Therefore, the profile AFFINT srl, which is considered as an accessory of a cladding system, turns out to have the same characteristics as similar inserted in coating systems that have obtained the release of ETA by ITC-CNR. For this reason, we can say that the profile when used according to the manufacturer’s specifications for external cladding structures, respecting the rules laid down by GUIDE ETAG004, complies with the specifications of coating systems that have been awarded the European Technical Approval.
4 LEGISLATIVE BASES AND GENERAL CONDITIONS

This document is prepared in accordance with:

Directive 89/106 / EEC harmonization of the laws and regulations of the Member States relating to construction products • DPR 248/93 Transposition of Directive 89/106 / EEC as amended by Presidential Decree 499/97
Document: Common Procedural Rules For Requesting, Preparing And Granting Of European Technical Approvals (Annex Committee Decision 94/23 / EC)
Guide to the European Technical Approval (ETA) document EOTA ETAG 004, March 2000

5 METHOD GUIDE

qualified Personnel
THE INFORMATION PROVIDED IN THIS DOCUMENT MUST BE UNDERSTOOD AS OF ADVICE FOR THE PROPER USE OF THE PRODUCT IN ACCORDANCE WITH THE REGULATIONS ON THE OPERATOR SAFETY.
In the preparation of this statement, reference is made to qualified personnel or skilled attendant to the installation of the product.
Intended by the manufacturer
The product is intended to be used for the purposes and uses described in this Privacy Statement. Any other use is considered improper and therefore dangerous and prohibited by the manufacturer. The manufacturer declines all responsibility for any damage to persons or property resulting from the information provided in this statement.
Storage and transportation
This product must be preserved in order to ensure their integrity. Pay attention to how it is stored to avoid extreme environmental conditions (excessive heat, etc..) And any agents that may damage the geometry or structure in the early stages of storage, transportation. The manufacturer declines all responsibility for any damage to persons or property resulting from the information provided in this statement.
mounting
INSTRUCT THE USE OF THE PRODUCT QUALIFIED PERSONNEL FOR THE DUTIES REQUIRED GENERATED BY ‘
The fixing must be carried out using expansion plugs suitable to support the load and the voltages induced by the fitting of the profile and the application of the structures of the coat. For fixing, please refer to the information required by the Guide ETAG 004 Edition March 2000 regarding the approval of the European insulation systems.

 

Certifications CE - DOP

Télécharger Certifications CE – DOP

Description CE DOP
715 – PROFILO AD OMEGA Certification CE Certification DOP
722 – PROFILO AD OMEGA Certification CE Certification DOP
722/50 – PROFILO AD OMEGA Certification CE Certification DOP
736– PROFILO AD OMEGA Certification CE Certification DOP
736/50 – PROFILO AD OMEGA Certification CE Certification DOP
742 – PROFILO AD OMEGA Certification CE Certification DOP
8016 – PROFILO AD U PERIMETRALE Certification CE Certification DOP
8023 – PROFILO AD U PERIMETRALE Certification CE Certification DOP
8028 – PROFILO AD U PERIMETRALE Certification CE Certification DOP
8037 – PROFILO AD U PERIMETRALE Certification CE Certification DOP
8044 – PROFILO AD U PERIMETRALE Certification CE Certification DOP
525 – PANN. ZINC. 2500X600 mm. Certification CE Certification DOP
530 – PANN. ZINC. 2500X600 mm. Certification CE Certification DOP
550 – PANN. ZINC. 2500X600 mm. Certification CE Certification DOP
250 – PARASPIGOLO ZN FORATO 25X25 Certification CE Certification DOP
300AV – PARASPIGOLO ANGOLO VARIABILE 30X30 Certification CE Certification DOP
600 – PROFILO CORNICE -SCURETTO a « Z » Certification CE Certification DOP
450/30 – PARASPIGOLO ZN AD ARCO 30X30 Certification CE Certification DOP
5001 – PROFILO DELIMITAZIONE O PARTENZA Certification CE Certification DOP
5001B – PROFILO DELIMITAZIONE PREV. WHITE Certification CE Certification DOP
5001U PROFILO DI DELIMITAZIONE/SCURETTO AUTOBLOCCANTE Certificazione CE Certification DOP
5001AR – PROFILO DELIMITAZIONE AD ARCO PREV. Certification CE Certification DOP
5006 – PROFILO ZN DELIMITAZIONE Certification CE Certification DOP
5020 – PROFILO ZN DELIMITAZIONE Certification CE Certification DOP
5025 – PROFILO ZN DELIMITAZIONE 24 x 40 Certification CE Certification DOP
300 – PARASPIGOLO ZN FORATO 30X30 Certification CE Certification DOP
430 – ANGOLARE PERIMETRALE 30X30 Certification CE Certification DOP
430/40 – ANGOLARE PERIMETRALE 40X40 Certification CE Certification DOP
430/50 – ANGOLARE PERIMETRALE 50X50 Certification CE Certification DOP
430/54 – ANGOLARE PERIMETRALE 50X40 Certification CE Certification DOP
427- ANGOLARE PERIMETRALE 27X30 B.A Certification CE Certification DOP
727 – PROFILO AD OMEGA 27/40/27 Certification CE Certification DOP
727/50 – PROFILO AD OMEGA 27/50/27 Certification CE Certification DOP
8050U – GUIDA AD »U » 40x50x40 Certificazione CE Certificazione DOP
8075U – GUIDA AD  » U » DA 75 40x50x40 Certificazione CE Certificazione DOP
80100U – GUIDA AD U -100 40X100X40 Certificazione CE Certificazione DOP
8075C – MONTANTE MM.75 50×74.8×47 Certificazione CE Certificazione DOP
80100C – MONTANTE MM 100 50 x 98.8 x 47 Certificazione CE Certificazione DOP
8015C – TRAVERSO 50/15 15 x 49 x 15 Certificazione CE Certificazione DOP
8027CA – TRAVERSO 50/27 Ala arrotondata 27 x 49 x 27 Certificazione CE Certificazione DOP
8027C – TRAVERSO 50/27 27 x 49 x 27 Certificazione CE Certificazione DOP
8015CA – TRAVERSO 50/15 Ala arrotondata 15 x 49 x 15 Certificazione CE Certificazione DOP
8000A- PROFILO A SCATTO 40 X 28 X 40 Certificazione CE Certificazione DOP